| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Load Capacity: | 41-50t |
|
Still deciding? Get samples of US$ 14800/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LPG tanker semi trailer Liquefied petroleum gas tank semi trailer LPG semi trailer
| General data | Tank body | ||||
| Chassis model | -- | Medium | LPG | ||
| Tractor model | -- | Filling medium | Propane of LPG | ||
| Engine power KW | -- | Work temperature ºC | -20~50 | ||
| Kerb mass kg | 14922 | Design temperature ºC | -42~55 | ||
| The maximum allowed | 25078 | Work pressure MPa | ≤1.61 | ||
| filling weight kg | |||||
| Total mass kg | 40000 | Design pressure MPa | 1.61 | ||
| Distribution of axle load in full load | King pin kg | 16300 | Corrosion allowance mm | 1.5 | |
| Rear axle kg | 23700 | Joint efficiency | 1 | ||
| Design speed limit Km/h | Straight road | 80 | Material | Shell | Q420R(Normalizing) |
| Turn | 20 | Head | Q420R(Normalizing) | ||
| Front overhang/rear overhang mm | -/1650 | Capacity m³ | 61.9 | ||
| Approach angle/departure angle° | -/20° | Filling weight per volume kg/m³ | 420 | ||
| Maximum stable side-inclination in full load ° | ≥23° | Hydraulic horizontal test pressure MPa | 2.1 | ||
| Overall dimension(L*W*H) mm | ~13590×2500×3990 | Air test pressure MPa | 1.61 | ||
| Design working life Years | 10 | Thermally insulation thickness/material mm | -- | ||
| Applicable mode of transportation | Road | Safety valve | |||
| Emergency valve | Type | A412F-25-22 | |||
| Type | Gas phase | QGJ43F-25-8 | Form | Interior and full lift | |
| Liquid phase | QGJ43F-25-7 | Norminal pressure MPa | 2.5 | ||
| Specification | Gas phase | DN25 | Valve base size mm | 68 | |
| Liquid phase | DN50 | Self-pressure MPa | 1.73 | ||
| Form | Emergency valve and excess flow cut off valve | Discharge-pressure MPa | ≤1.93 | ||
| Operation mode | Manual | Return-pressure MPa | ≥1.56 | ||
| Closed stop time | ≤5S | Diameter of rupture disk mm | -- | ||
| Melt closed temperature ºC | 75±5 | Burst pressure of rupture disk MPa | -- | ||
| Level gauge | Handling device | ||||
| Type | UQZ-25P | Type | Gas phase | YKAG-33-6 | |
| Form | Float | Liquid phase | YKAG-33-7 | ||
| Nominal pressure MPa | 2.5 | Specification | Gas phase | DN25 | |
| Measurement range mm | 50~2478 | Liquid phase | DN50 | ||
| Precision | 2.5 | Pattern | Quick tie-in | ||
| Pressure gauge | YN-100T | Norminal pressure MPa | 3.3 | ||
| Therm-ometer | WTQ-280 | Conducting electrostatic tape type | JD-2 | ||
| Approvals | Supervision Regulations on Safety Technology for Transportable Pressure Vessel (TSG R0005-2011 ) | ||||
| Design code | ASME sec viii div.2 edition 2017 | ||||
| Product standard | The design/fabrication/testing and inspection, and acceptance of the tank must fully comply with GB/T19905-2005"Liquefied gas tanker". | ||||
| Painting | Shot blast at Standard SA 2.5 prior to application of anti-corrosion primer, polyurethane top coat. Total coating thickness 300um. | ||||
| Color as per clients requirement | |||||
Features:
1. Better performance --- finite element analysis is used in vehicle.
2. Meet global road and rail transportation regulations --- IMDG / ADR / RID / TC / CSC / ASME / EN certificates is accessable.
3. Strong beam and frame --- top class rolled steel is used; submerged arc automatic welding; key points are reinforced;
4. High loading capacity --- tough ribs design; low platform; suspensions for various road condition.
5. Long service life --- Strict factory inspections and reliable spare parts.
Tank production process:
Strict production management, longer service life!!!
Wide variety of products One-stop service.
Wide variety of products One-stop service.Welcome visiting our factory!!!
1. Q: Does your company has your own factory?
A: Yes, we are factory, with long history and famous reputation in Shandong, China.
2. Q: Could you special design and produce for me?
A: Definitely! We have all kinds of professional engineers to meet your various needs.
3. Q: What's your payment term?
A: We accpet both T/T and L/C.
T/T: 30% before production, 70% before leaving factory.
L/C: 100% irrevocable Credit of Letter.
Any question, please let me know.
){kind=link}